Specifications

9031035 E4 Configuration Views
3-5
Performance View
Physical Address
The interface’s address at the protocol layer immediately below IP in the
protocol stack. The ethernet address of the bridge is returned for both
channels of the bridge.
Network Address
The network address for the interface.
Double-clicking on any column entry opens the Address Translation Table
Information View in which you can update the entry.
Address Translation Table Information View
The fields in the Address Translation Table Information View are similar to
those in the Address Translation Table; you can update the information in this
view only.
Performance View
The Performance View, accessible from the Ungermann Bass hub Location
View, the Topology View, or Alarm and Find View icons is identical to the
Performance View of the application selected as the Primary Application. The
view provides a breakdown of network traffic errors for the Ungermann Bass
hub. Each error attribute is summarized for the total interval since first poll
and the rate interval between polls.You can access the Event Log and the
Alarm View from the Performance View.
Diagnostic View
The Diagnostic View provides Performance View statistics, described in the
last section, or application-specific performance tables. You can access the
Alarm View and Event log for the device through the Performance View.
Table 3-2 describes specific applications and matching views that appear
when the Diagnostic menu choice is selected.
Table 3-2. Specific Performance Information Accessed from the Diagnostic
Menu Choice
Application View Description
MIB-II Performance View with Multi-Attribute Line
Graph