Specifications

9031035 E4 Ethernet Applications
4-5
Ethernet Applications
Ok
Indicates whether there is a known operational failure or problem in the hub.
A description of the operational states is described inTable 4-2.
.
Normal Operation
Displays information concerning the operational health of the hub and its
components.
Health Data
Numeric information concerning the operational health of the hub and its
components.
Custom Counter Selection
Selects a port event that increments the Port Custom Counter associated with
that port. Setting this attribute also sets the Port Custom Counter to zero.
Each occurrence of the selected event increments by 1.
Carrier Senses
The number of times carrier sense was on when sampled every 10
milliseconds. This attribute applies only in tier 1.
Ethernet Basic Port View
You can open the Port Config View by selecting Port Config from the Basic
Ether Icon Subviews menu, or by selecting the Basic Ether icon, opening the
View menu, and selecting Port Config from the Icon Subviews menu. The
view and its fields are described below:
Model Name
The model name for this concentrator.
Table 4-2. Hub Operational States
Health State Description
other Undefined or unknown.
Ok No known failures or problems.
hubFailure Failure affecting all groups.
groupFailure Failure affecting all ports on one group.
portFailure Failure of one or more but not all ports in a
group.
generalFailure Some other failure or problem not covered
above.