Specifications

Card + Hub App
Access/One Card Configuration View
Hub Applications Ungermann Bass Hub
5-4 Management Module Guide
Slot
The card’s relative position in the enclosure starting at 1.
Type
The card type.
Status
Provides module states during power-on diagnostics. The module states are
described in Table 5-3.
Access/One Hub Board Status View
You can double-click any column entry in the Access/One Card Configuration
Table to view the Access /One Board Status View. The fields for this view are
described below:
Model Name
The application type.
Table 5-3. Module State Descriptions
State Description
notApplicable Unknown.
initializing Initializing.
power on diagnostics Running power on diagnostics.
debug mode Module is in debug mode.
online diagnostics Online diagnostics in progress.
module fault This module is faulty.
net booting Network booting requested.
net loading Network downloading.
cbloading Supervisor is loading configuration data usintg the
control bus using the eontrol bus interface.
up Intelligent module is up.
standby The module is in standby state.
software disabled The software is disabled.
reset Module is being reset.
inactive This concentrator is inactive.
active This non-intelligent concentrator is active.
not responding Module is not reacting to supervisor polls.