User`s guide

SIMM Upgrade
B-4 Switch Settings, Upgrades, and Installations
Figure B-2 SIMM Slot Locations
B.2.2 Installing the DRAM SIMM
To install a DRAM SIMM, refer to Figure B-3 and proceed as follows:
1. With the SIMM alignment notch oriented as shown in Figure B-3, insert the SIMM down
between the connector teeth.
2. Pivot the SIMM downward so the connector clips align with the two side notches of the SIMM
and the connector clips lock the SIMM into place.
!
CAUTION
Observe all antistatic precautions when handling sensitive electronic equipment.
DRAM SIMM