Specifications

Configuration Views Redundancy View
SPECTRUM Enterprise Manager Page53 Cabletron Ethernet Hubs
Panels at the bottom of the Redundancy
Information View provide additional information.
For the IRM2, MRXI, and MiniMMAC, the panels
are Board Member, Port Member, and
Redundancy Table. For the IRM3, there are two
Redundancy Table panels. Double-clicking on any
of the entries in the Polled Address list of the
Redundancy Table for the IRM2, MRXI, or
MiniMMAC opens the Address Display View. The
Address Display View has two fields: Polled
Address, which is the MAC address, and
Instance, which is the board number and port
number associated with the address. For
example, 1.1 is board 1, port 1. The IRM3 has no
Address Display View.
The Redundancy Information View also provides
the following two buttons:
The Address Delete View
Address Delete View Address Delete View
Address Delete View button displays the
Address Delete View. This view contains the
Redundancy Table and a field. Table 14 provides
the information contained in the view.
Circuit Enable Enables or disables the
indicated circuit.
Circuit Number The number from the circuit
names in the Redundancy
table (e.g., Circuit 04).
Board Port
Instance
The board number and port
number that the redundant
circuit is connected to. For
example, 3.6 is board 3,
port 6.
Port Circuit
Status
The current state of this
port in the redundant
circuit.
Port Circuit Type The type of port this port is
in the redundant circuit.
Table 13: MMAC Redundancy Information
View Fields
Field Definition
Address Delete View
Table 14: Address Delete View Fields
Field Definition
MAC Address
Delete (IRM2),
MRXI,
MiniMMAC
Removes the Ethernet
address from the polling list
for the indicated circuit. You
enter a MAC address in this
field.
IP Address Delete
(IRM3)
Removes the IP address
from the polling list for the
indicated circuit. You enter
an IP address in this field.