Specifications

SNMP NB30 Device View
SNMP NB30 Front Panel Switches
Device View
2-8
Cabletron SNMP Bridges
Management Module Guide
Ethernet Port
XMT (Transmit)
When this green LED is flashing, the Ethernet side of the bridge is
transmitting packets.
RCV (Receive)
When this yellow LED is flashing, the Ethernet side of the bridge is receiving
data packets.
CP (Collision Present)
When this red LED is flashing, a collision is occurring on that Ethernet
segment.
POK (Port OK)
When this green LED is on, the Ethernet port has passed an Internal Loop
Back Test and is ready for transmission.
SNMP NB30 Front Panel Switches
FORWARD BROADCAST
When this switch is on (•), it allows the NB30 to forward broadcast messages.
ROOT
NOTE
You can access Port Performance Views (remote and local) through the Icon
Subviews menu and by single-clicking the right mouse button to bring up the
pop-up menu while in this Device View. The Device menu allows you to access
Configuration, Performance, Diagnostic, and Application Views from the
Device View.
NOTE
These switch settings are not depicted in the NB30 Device View, and must be
seen by selecting Bridge Setup from the Configuration View.