Specifications

EFDMIM Device View
Changing MIM Representations
Device View
2-28
Cabletron SNMP Bridges
Management Module Guide
Changing MIM Representations
You can change the MIM representation of the entire hub or the MIM
representation of the EFDMIM installed in the hub. This section describes
several ways to change the representation of MIMs in a hub.
Changing MIM Representations on the Entire Hub
To change the MIM representation of the entire hub Device View, follow these
steps:
1. In the hub’s Physical Device View, select the Device Menu menu option.
2. Click on either the Display Physical MIMs or Display Logical MIMs
menu option. The entire hub changes to the selected MIM representation.
Changing MIM Representations Using the Menu Bar
To change the MIM representation of the EFDMIM using the menu bar, follow
these steps:
1. In the hub’s Physical Device View, move the mouse pointer onto the
EFDMIM. Single-click the left mouse button to highlight the EFDMIM.
2. Select the View menu, and select the Icon Subviews submenu. Select the
Go Logical menu options from this submenu.
3. The EFDMIM changes its MIM representation. A selected single MIM
appears to extend from the hub chassis.
NOTE
You must start in physical representation to use this toggle feature.