User guide

9032785 ELS100-24TXM User Interface 27
Factory Defaults
Table 3-1 lists the factory default settings for the switch configuration
parameters. Each of these parameters can be changed via the console
menus or Telnet.
Table 3-1. Factory Default Settings
Parameter Default Value
Active A
g
in
g
Time 300
Auto-ne
g
otiation Enable Yes
Broadcast Cutoff Rate 500000
BootP/DHCP Enable Yes
Brid
g
e Priority 32768
Class of Service Enable No
Class of Service Port Priority 0
Class of Service Priority
Threshold
4
Flow Control Enable No
Forward Delay 15
Full Duplex Yes
Hello Time 2
Max A
g
e20
Password <none>
Path Cost 10 for 100Mbps speed ports
100 for 10Mbps speed ports
Port Enable Yes
Port Priority 128
Port Speed 100
Port Mirrorin
g
Enable No
Screen Timeout 0
SNMP Private Community Name private
SNMP Public Community Name public
Spannin
g
Tree Protocol Enable No
Terminal Baud Rate 9600
Terminal Hardware Flow Control No
VLAN Enable No
VLAN Port Type Access