User guide

9033060 Installation 25

100Base-FX Fiber Ports

The 100Base-FX Fiber port uses SC connectors. Figure 2-7 shows an

fiber connector being inserted into a fiber port on the ELH100-12/24TX.

Figure 2-7. Inserting an SC Fiber Connector into a Fiber Port

The fiber uplink modules employed (Table 2-6) support multi-mode 62.5/

125mm fiber. The 100Base-FX ports use SC fiber connectors. The fiber

connectors are configured as a receive (RX) / transmit (TX) pair.

Table 2-6. Fiber Uplink Module

Part Number Functions Description

ELH-ULSW-F2 100Base-FX-MM 2-port multi-mode (MM) fiber uplink module us-

ing SC fiber connectors, with internal switching

between the 10 and 100 Mbps repeater buses.