User guide

9033060 ELH100-12/24TX User Interface 31
System Information Menu
Use the System Information menu to display descriptive information
about the hub, or for quick system identification. Figure 3-4 shows and the
accompanying table describes the System Information menu
.
Figure 3-4. System Information Menu
XMODEM Download Downloads new firmware to update the Agent Module via a
console interface.
User Password Sets Administrator and Guest names and passwords used for
system access.
Console Configuration
Sets console time-out and refresh period for displayed statistics.
Hub Statistics Displays network performance for each hub in the stack.
Port Statistics Displays network performance for the selected port.
System Information
==================
System Desc.: Cabletron ELH100 Dual Speed Hub
Sys. Obj. ID: 1.3.6.1.4.1.52.3.9.1.10.5
Sys. Up Time: 6213437 (0 day 17 hr 15 min 34 sec)
System Name:
Contact: Cabletron Inc., 0021-516-435-6475
Location:
<APPLY> <OK> <CANCEL>
Type the system name character string
Use <TAB> or cursor keys to move, <ENTER> to select,
<Ctrl-F> to move forward a character, <Ctrl-B> to move back a character
Selection Description
System Description System hardware description.
System Object ID Object identifier for the hub’s network management subsystem
as defined in MIB II.
Sys. Up Time Time since the hub was powered on.
System Name* Name assigned to the hub system.
Contact* Contact person for the system.
Location* Specifies the area or location where the system resides.
* Maximum string length is 255, but the screen only displays 44 characters. You
can use the arrow keys to browse the whole string.