User guide

34 ELH100-12/24TX User Interface ELH100-12/24TX
SLIP IP IP address of the Agent Module used when accessing
the configuration program via an out-of-band SLIP
connection to the serial port.
The hub does not allow the SLIP IP address to be the
same as the IP address.
SLIP Subnet Mask Subnet mask for the SLIP IP address used by the Agent
Module.
SLIP Gateway SLIP gateway IP address used to pass traffic to the
network management station. Note that the gateway
must be defined if the management station is located in
a different IP segment.
Max # of allowed
Telnet sessions
The maximum number of Telnet sessions allowed to
simultaneously access the Agent Module.
Note: The maximum number of management sessions
(not necessarily Telnet sessions) is 2.
Agent Ethernet Port
Attached to
The network segment (10 Mb/s or 100 Mb/s) to which
the Agent Module is attached.