User guide

36 ELH100-12/24TX User Interface ELH100-12/24TX
SNMP Communities
Figure 3-7. SNMP Communities
SNMP Communities
================
Community Name Access Status
------------ --------- -------
1. public READ/WRITE Enabled
2.
3.
4.
5.
<APPLY> <OK> <CANCEL>
Type a community name, 20 characters or less
Use <TAB> or cursor keys to move, <SPACE> to toggle, <ENTER> to select,
<Ctrl-F> to move forward a character, <Ctrl-B> to move back a character
Selection Description
Community Name The community name for read only SNMP access to
the device (1-10 character range; the default name is:
“public”).
Access Management access is Read Only or Read/Write.
Status Indicates operational status of the community as
Enabled or Disabled.