User guide

78 Web-Based Management ELH100-12/24TX
History Control Entry
RMONcanbeusedtocreatearecordofnetworkutilization,packettypes,
errors and collisions. You need a historical record of activity to track down
intermittent problems. Historical data can also be used to establish normal
baseline activity, which may reveal problems associated with high traffic
levels, broadcast storms, or other unusual events. Historical information
can also be used to predict network growth and plan for expansion before
your network becomes too overloaded. Select “History” then “History
Control Entry” to display the collection items defined in the history control
table.
Item Description
History Index An index that uniquely identifies an entry in the History Control
table. Each such entry defines a set of samples at a particular
interval for an interface on the device.
Data Source MIB variable that is being monitored:
1.3.6.1.2.1.2.2.1.1.1 - Agent board 100 Mbps interface
1.3.6.1.2.1.2.2.1.1.2 - Agent board 10 Mbps interface
1.3.6.1.2.1.2.2.1.1.3 - Serial port for out-of-band connection
1.3.6.1.2.1.2.2.1.1.4 - 100 Mbps stack backplane
1.3.6.1.2.1.2.2.1.1.5 - 10 Mbps stack backplane
1.3.6.1.2.1.2.2.1.1.6 - Stack Unit 1 100 Mbps segment
1.3.6.1.2.1.2.2.1.1.7 - Stack Unit 1 10 Mbps segment
...
1.3.6.1.2.1.2.2.1.1.16 - Stack Unit 6 100 Mbps segment
1.3.6.1.2.1.2.2.1.1.17 - Stack Unit 6 10 Mbps segment
Buckets Requested Requested number of discrete time intervals over which data is
to be saved in the part of the media-specific table associated
with this entry.
Buckets Granted Number of discrete sampling intervals over which data shall
actually be saved in the part of the media-specific table
associated with this entry.
Interval Interval in seconds over which the data is sampled for each
bucket in the part of the media-specific table associated with
this entry.
Owner Person who added this entry to the control table.
Status Indicates if this control entry has been set to valid or invalid.