Specifications

2-112 SmartSwitch 6500 Reference Manual
Descriptions
Examples
The show lecstlvset example is used here to show how delete lecstlvparam works. Observe that [2] in show
lecstlvset
is [Max Unknown Frame Time]. That is why [Max Unknown Frame Time] appears in delete
lecstlvparam
when “2” is entered at the [TLVIndex] prompt.
switch_prompt # show lecstlvset
TlvsetNumber(ALL) :2
TlvIndex TlvDescription Value
===========================================================================
TLVSet 2 :
1 Control Timeout 200
2 Max Unknown Frame Time 4
6 Arp Aging Time 250
7 Forward Delay 30
switch_prompt #
switch_prompt # delete lecstlvparam
TlvsetNumber() : 2
TlvIndex() : 2
TLVIndex TLVDescription Value
============================================================================
2 Max Unknown Frame Count 4
Confirm(y/n)?:y
switch_prompt #
Operator Parameters/Permissions Description
delete
lecstlvparam
[TLVSetNumber] <tlvsetnumber>
[TLVIndex] <tlvindex>
Administrator
Removes a TLV parameter from a TLV set on the LECS.
Use
show lecstlvset before entering this command, so
you know the index number of the TLV parameter you want
to delete.