Specifications

SmartSwitch 6500 Reference Manual 2-153
PnniLink
Use PnniLink to display characteristics of all PNNI links connected directly to the switch. The characteristics include
operation of each link and the relationship between each link and the nodes it connects.
2p›F Use PnniNetworkLink to display links not connected directly to the switch but
known to the switch through the exchange of database information.
Operators
show
Parameters
Input Parameter Description Value/Field Size Default
[Num] Index number of the link as assigned by the
console. Use the
show pnnilink all command
to get a list of index numbers.
Positive integer or All All
Output Parameter Description
[Num] Index of the link as assigned by the console.
[Port Number] Physical or virtual port number on the switch.
[Node Index] Index number of a logical node on the switch.
[Remote Node IP Addr] IP address of remote node (node on other end of link).
[Hello State] For horizontal and outside links between lowest-level nodes and for links of unknown
type, this parameter indicates the state of the Hello protocol exchange over this link.
Possible values are: Down, Attempt, 1WayInside, 2WayInside, 1WayOutside,
2WayOutside, and CommonOutside.
[Link Type] Type of link. Possible values are: Unknown, Uplink, and Lowest Level Horizontal
Link, and Horizontal Link to/from LGN.