Specifications

SmartSwitch 6500 Reference Manual 2-167
PnniNetworkNode
Use PnniNetworkNode to display all nodes within the PNNI hierarchy as seen from a logical node on the switch. The
logical node on the switch is viewed as the local node. The other nodes are viewed as remote nodes.
Operators
show
Parameters
Input Parameter Description Value/Field Size Default
[Num] Index number of the remote node as assigned by
the console. Use the
show pnninetworknode
all
command to get a list of index numbers.
Positive integer or All All
Output Parameter Description
[Node Id] Identifier of the remote node.
If you give a specific [Num}, the
show pnninetworknode command displays the following additional fields.
[Node Index] An index into the set of nodal information associated with the remote node. This index
is needed since there may be multiple entries for nodal information from a specific
node.
[Peer Group Id] Identifier of the peer group of the remote node.
[Node ATM Address] ATM end system address of the remote node.
[Rest. Transit] Whether or not the remote node is restricted to only allow support of SVCs originating
or terminating at its location. Possible values are: True and False. True indicates that
the transit capabilities are restricted; that is, transit connections are not allowed. False
indicates that transit connections are allowed. This parameter reflects the setting of the
restricted transit bit received in the nodal information PTSE of the originating node.