Specifications

2-202 SmartSwitch 6500 Reference Manual
Port
Use Port to add or delete a virtual port on the switch.
2p›F You can hot-swap TSMs. Hot-swapping is replacing a module when the chassis is
powered up. If you replace a TSM with another TSM of the same type (same I/O
ports), existing configuration of port parameters is not affected. This includes
parameters set using any of the following attributes: ATMRoute,
CACServiceClassBw, IlmiConfig, NetPrefix, Port, PortConfig, PVC, PVP,
ServiceRegistry, SigTimer, SigStatistics, SSCOPConfig, and SSCOPStatistics. If
you replace a TSM with another TSM of a different type, existing configuration
of port parameters is deleted. The deletion occurs when the new module is plugged
into the chassis backplane.
Operators
add, delete
Parameters
This attribute has no output parameters.
Input Parameter Description Value/Field Size Default
[PortNumber] Port number on the switch. 1A1.n to 8B4.n No default
[PortAdminStatus] Enables/disables administrative status
of the port. If the port is Down, it
remains idle with no activity ( such as
signalling, ILMI, or PVCs).
Up, Down Up
[IlmiAdminStatus] Enables/disables ILMI status of the
port.
Up, Down Up
[SigType] Type of signalling on the port.
autoConfig means ILMI determines
signalling type by negotiation (hence
ILMI cannot be disabled for SigType
autoConfig). pvcUni and pvcNni
disable signalling.
autoConfig, uni30, uni31, uni40
iisp30, iisp31, pnni10, uniPvc,
nniPvc
autoConfig
[SigRole] Signalling role. Other, Network, User Other