Specifications

SmartSwitch 6500 Reference Manual 2-207
PortConfig
Use PortConfig to manage configuration of switch ports.
2p›F You can hot-swap TSMs. Hot-swapping is replacing a module when the chassis is
powered up. If you replace a TSM with another TSM of the same type (same I/O
ports), existing configuration of port parameters is not affected. This includes
parameters set using any of the following attributes: ATMRoute,
CACServiceClassBw, IlmiConfig, NetPrefix, Port, PortConfig, PVC, PVP,
ServiceRegistry, SigTimer, SigStatistics, SSCOPConfig, and SSCOPStatistics. If
you replace a TSM with another TSM of a different type, existing configuration
of port parameters is deleted. The deletion occurs when the new module is plugged
into the chassis backplane.
Operators
modify, show
Parameters
Input Parameter Description Value/Field Size Default
[PortNumber] Port number on the switch. 1A1 to 8B4 ( for physical ports),
1A1.n to 8B4.n (for virtual ports,
or All
All
[PortAdminStatus] Enables/disables administrative status of
the port. If the port is Down, it remains idle
with no activity ( such as signalling, ILMI,
or PVCs).
Up, Down Up
[IlmiAdminStatus] Enables/disables ILMI status of the port. Up, Down Up
[SigType] Type of signalling on the port. autoConfig
means ILMI determines signalling type by
negotiation (hence ILMI cannot be
disabled for SigType autoConfig). pvcUni
and pvcNni disable signalling.
autoConfig, uni30, uni31, uni40
iisp30, iisp31, pnni10, uniPvc,
nniPvc
autoConfig
[SigRole] Signalling role. Other, Network, User Other
[InterfaceType] Interface type. Public, Private Private