Specifications

SmartSwitch 6500 Reference Manual 2-213
[Timing]
(622 Mbps only)
Enables or disables timing at the
port. Timing can improve speed
matching and sequencing of
transmissions between the switch
and network.
Disabled, Enabled Disabled
Output Parameter Description
[Port ID] Port number. (Same as the [PortNumber] input parameter.)
[Frame Type]
(155, 622 Mbps)
Port physical Mode. (Same as the [PortMode] input parameter.)
[Scrambling]
(34, 45, 622 Mbps)
Enables or disables scrambling. Scrambling is bit-level signal processing applied to data
streams prior to transmission. Scrambling can reduce signal interference.
[EmptyCell]
(34, 45 Mbps)
Type of cells sent as filler when the port is not sending data.
[Framing]
(45 Mbps only)
Type of framing used.
[Length]
(45 Mbps only)
Line length for port (corresponds to length of cable attached to port). GT225 means the
cable is greater than 225 feet. LT225 means the cable is less than 255 feet.
[Timing]
(622 Mbps only)
Enables or disables timing at the port. Timing can improve speed matching and
sequencing of transmissions between the switch and network.
Input Parameter Description Field Size/Value Default