Specifications

SmartSwitch 6500 Reference Manual 2-229
In the Output Parameter table below, (
</d>
) indicates parameters that are available only through the show pvc /d
(detailed) command.
Output Parameter Description
[Conn Id] Cross-connect ID of the PVC (as assigned by switch software).
Each PTP PVC has a unique cross-connect ID. PMP PVCs
might have the same cross-connect ID but different
cross-connect sub IDs.
[Conn SubId] Cross-connect sub-ID of the PVC. Each PTP PVC and PMP
PVC has a unique cross-connect sub-ID.
[Low Port] Number of the Low Port (based on lexical order).
[Low VPCI] VPCI of the Low Port.
[Low VCI] VCI of the Low Port.
[Low Type] Connection type from perspective of Low Port.
[High Port] Number of the High Port (based on lexical order).
[High VPCI] VPCI of the High Port.
[High VCI] VCI of the High Port.
[High Type] Connection type from perspective of High Port.
[Admin Status] Administrative status of the PVC. Possible values are: Up or
Down.
[Low - High Traffic Decs Index (TX)]
</d>
Index of the traffic descriptor in the direction of flow from Low
Port to High Port.
[High - Low Traffic Decs Index (RX)]
</d>
Index of of the traffic descriptor in the direction of flow from
High Port to Low Port.
[Low to High Operation Status]
</d>
Operational status of low-to-high connection. Possible values
are: Up or Down.
[High to Low Operation Status]
</d>
Operational status of high-to-low connection. Possible values
are: Up or Down.
[Port Status]
</d>
Operational status of port.
[Creation Time]
</d>
Time the PVC was created (relative to the switch boot time).