Specifications

2-258 SmartSwitch 6500 Reference Manual
SigStatistics
Use SigStatistics to display signaling statistics of a port.
2p›F You can hot-swap TSMs. Hot-swapping is replacing a module when the chassis is
powered up. If you replace a TSM with another TSM of the same type (same I/O
ports), existing configuration of port parameters is not affected. This includes
parameters set using any of the following attributes: ATMRoute,
CACServiceClassBw, IlmiConfig, NetPrefix, Port, PortConfig, PVC, PVP,
ServiceRegistry, SigTimer, SigStatistics, SSCOPConfig, and SSCOPStatistics. If
you replace a TSM with another TSM of a different type, existing configuration
of port parameters is deleted. The deletion occurs when the new module is plugged
into the chassis backplane.
Operator
show
Parameters
Input Parameter Description Value/Field Size Default
[PortNumber] Port number on the switch. 1A1 to 8B4 (for physical ports),
1A1.n to 8B4.n (for virtual ports),
or All
All
Output Parameter Description
[Port#] Port number on the switch. (Same as the [PortNumber] input parameter.)
[Detect Setup Attempts] Number of set-up messages received.
[Emit Setup Attempts] Number of set-up messages transmitted.
[Detect Unavailable Routes] Number of SVC calls rejected by this switch because of unavailable IISP or UNI
routes generated on other switches.
[Emit Unavailable Routes] !Ö“LiÀÊœvÊ.7+ÊV>••ÃÊÀi•iVÍi`ÊLßÊÍ…ˆÃÊÃ݈ÍV…ÊLiV>ÖÃiÊœvÊÖ˜>Ü>ˆ•>L•iÊ77.+ÊœÀÊ2!7Ê
ÀœÖÍiÃÊ}i˜iÀ>Íi`Êœ˜ÊÍ…ˆÃÊÃ݈ÍV…°