Specifications

SmartSwitch 6500 Reference Manual 2-261

SigTimer

Use SigTimer to set or display signaling timer values for a port

2p›F You can hot-swap TSMs. Hot-swapping is replacing a module when the chassis is

powered up. If you replace a TSM with another TSM of the same type (same I/O

ports), existing configuration of port parameters is not affected. This includes

parameters set using any of the following attributes: ATMRoute,

CACServiceClassBw, IlmiConfig, NetPrefix, Port, PortConfig, PVC, PVP,

ServiceRegistry, SigTimer, SigStatistics, SSCOPConfig, and SSCOPStatistics. If

you replace a TSM with another TSM of a different type, existing configuration

of port parameters is deleted. The deletion occurs when the new module is plugged

into the chassis backplane.

Operators

modify, show

Parameters

Input Parameter Description Value/Field Size Default

[PortNumber] Port number on the switch. 1A1 to 8B4 (for physical ports),

1A1.n to 8B4.n (for virtual ports),

or All

All

[TimerId] Timer name. +œÃÃˆL•iÊÜ>•ÖiÃÊ>Ài\Ê0Ïä£]0ÏäÏ]Ê

0ÏäÈ]0Ïän]Ê0Ïä™]Ê0Ï£ä]Ê0Ï£Ï]Ê0Ï£È]Ê

0Ï£Ç]Ê0ÏÔÔ]Ê0ÏÏ£]Ê0ÏÏÏ]Ê0Ï™Ç]0Ï™n]Ê

0Ï™™°

T303

[Interval] Timer value in milliseconds. Zero or positive integer 0

[Retries] Number of times the timer

has to be restarted.

Zero or positive integer 1