Specifications

2-266 SmartSwitch 6500 Reference Manual
SSCOPConfig
Use SSCOPConfig to set or display switch Service-Specific Connection-Oriented Protocol parameters. SSCOP
parameters control how the switch interoperates with other switches.
2p›F You can hot-swap TSMs. Hot-swapping is replacing a module when the chassis is
powered up. If you replace a TSM with another TSM of the same type (same I/O
ports), existing configuration of port parameters is not affected. This includes
parameters set using any of the following attributes: ATMRoute,
CACServiceClassBw, IlmiConfig, NetPrefix, Port, PortConfig, PVC, PVP,
ServiceRegistry, SigTimer, SigStatistics, SSCOPConfig, and SSCOPStatistics. If
you replace a TSM with another TSM of a different type, existing configuration
of port parameters is deleted. The deletion occurs when the new module is plugged
into the chassis backplane.
Operators
modify, show
Parameters
Input Parameter Description Value/Field Size Default
[PortNumber] Port number on the switch. 1A1 to 8B4 (for physical ports),
1A1.n to 8B4.n (for virtual ports),
or All
[MaxPD] !Ö“LiÀÊœvÊ.-Ê+-2ÃÊ>vÍiÀÊ
Ý…ˆV…Ê>Ê+œ••Ê+-2ʈÃÊ
}i˜iÀ>Íi`°Ê
5-20 20
[MaxCC] !Ö“LiÀÊœvÊ*.57!Ê+-2ÃÊ
Ãi˜ÍÊ`ÖÀˆ˜}Ê•ˆ˜iÊ
iÃÍ>L•ˆÃ…“i˜Í°Ê
4-10 4
[PollTime] 0ˆ“iÊ-ˆ˜Ê“ˆ••ˆÃiVœ˜`îÊ
LiÍÝii˜Ê}i˜iÀ>͈œ˜ÊœvÊ+œ••Ê
+-2ðÊ
100-1000 750
[KeepAliveTime] ->ÍiÊœvÊ+œ••.Í>ÍÊiÞV…>˜}iÊ
-ˆ˜Ê“ˆ••ˆÃiVœ˜`îʈ˜ÊÍ…iÊ
>LÃi˜ViÊœvÊ.-Ê+-2ÊÍÀ>vvˆV°
1000-2000 2000