Specifications

SmartSwitch 6500 Reference Manual 2-283
Descriptions
Operator Parameters/Permissions Description
modify
switchconfig
[SwitchName] <switchname>
[IPAddress] <ipaddress>
[IPNetMask] <ipnetmask>
Administrator
Runs automatically when you first configure the switch,
then prompts you for the required input. Enter
modify
switchconfig
if you want to change any of the above
parameters after the initial switch configuration. Unless
you are experienced with configuring IP subnets, it is
recommended that you accept the IP netmask default.
show
switchconfig
All Displays hardware and software configuration information
about the switch. It also includes auto-detect hardware
configuration information, such as number of switch boards
and memory, and software information such as the type and
version. Any future hardware or software changes will be
detected automatically when the switch is rebooted.