Specifications

SmartSwitch 6500 Reference Manual 2-19

Console Commands

Descriptions

Output Parameter Description

[ELAN Number] Number of the ELAN to which the BUS belongs.

[ELAN Name] Name of the ELAN to which the BUS belongs.

[ATM Address] ATM address of the ELAN.

[Max Frame Size] Maximum transfer unit assigned for this client. (Same as the [MTU] input parameter.)

[Connection Method] Type of connection used. (Same as the [ConnectMethod] input parameter.)

[Distribute VPI/VCI] VPI/VCI values of control direct VCC or multicast send VCC.

[ELAN Type] Data-link type used by the ELAN.

[Multipoint] Indicates whether control distribute VCC is PMP (point-to-multipoint) or PTP

(point-to-point).

[Error Logging] Whether or not BUS error log is enabled.

[Min TD Negotiation] Whether or not minimum TD negotiation is enabled.

Operator Parameters/Permissions Description

add buselan

[ELANNumber] <elannumber>

[ELANName] <elanname>

[ConnectMethod] <connectmethod>

[ELANType] <elantype

[Multipoint] <distributevcctpe>

[MTU] <maximumframesize>

[ErrorLogEnable] <errorlogenable>

[MinimumTDEnable] <minimumtdenable>

[ForwardPeakCellRate]

Administrator

Creates a BUS on a specified ELAN. If the

corresponding LESELAN exists, then the added

BUSELAN should have similar characteristics.

delete

buselan

[ELANNumber] <elannumber>

Administrator

Removes the BUS from a specified ELAN and

drops clients connected to it.