Specifications

SmartSwitch 6500 Reference Manual 2-29
Console Commands
CacInfo
Use CacInfo to display bandwidth allocated to switch ports per service category.
Operators
show
Parameters
Input Parameter Description Value/Field Size Default
[PortNumber] Port number on the switch.
You can specify a physical
or virtual port.
1A1 to 8B4 (for physical ports),
1A1.n to 8B4.n (for virtual ports),
or All
All
[BandwidthUnit] Unit for specifying
bandwidth.
CPS (cells per second),
KBS (Kbits per second),
MBS (Mbits per second),
or PER (percentage)
CPS
Output Parameter Description
[Port#] Port number on the switch. (Same as the [PortNumber] input parameter.)
[Total BW] Available physical link bandwidth (in bandwidth units specified as input parameter).
[Total BW Allocated] Bandwidth allocated on this port.
[BwAlloc for
ServiceCategory]
Bandwidth allocated for each service category. Supported service categories are:
CBR (constant bit rate), UBR (unspecified bit rate), RTVBR (realtime variable bit
rate), NRTVBR (non-realtime variable bit rate), ABR (available bit rate).