Specifications

SmartSwitch 6500 Reference Manual 2-33
Console Commands
CACServiceClassBw
Use CACServiceClassBw to set or display the bandwidth allocated to each service category.
2p›F You can hot-swap TSMs. Hot-swapping is replacing a module when the chassis is
powered up. If you replace a TSM with another TSM of the same type (same I/O
ports), existing configuration of port parameters is not affected. This includes
parameters set using any of the following attributes: ATMRoute,
CACServiceClassBw, IlmiConfig, NetPrefix, Port, PortConfig, PVC, PVP,
ServiceRegistry, SigTimer, SigStatistics, SSCOPConfig, and SSCOPStatistics. If
you replace a TSM with another TSM of a different type, existing configuration
of port parameters is deleted. The deletion occurs when the new module is plugged
into the chassis backplane.
Operators
modify, show
Parameters
Input Parameter Description Value/Field Size Default
[PortNumber] Port number on the switch. 1A1 to 8B4 (for physical ports),
1A1.n to 8B4.n (for virtual ports),
or All
[ServiceCategory] .iÀ܈ViÊV>Íi}œÀß° CBR, UBR, RTVBR, NRTVBR, ABR UBR
[MaxBandwidthInPerCBR] >Þˆ“Ö“ÊL>˜`݈`Í…Ê
>••œV>Íi`ÊvœÀÊ+*-°Ê-0œÍ>•ÊœvÊ
>••ÊÍ…iÊÃiÀ܈ViÊV>Íi}œÀßÊ
L>˜`݈`Í…ÊÃ…œÖ•`ʘœÍÊ
iÞVii`Ê£ä䯰®
Zero or positive integer
[MaxBandwidthInPercentage
RTVBR]
Maximum bandwidth
allocated for RTVBR.
Zero or positive integer
[MaxBandwidthInPercentage
NRTVBR]
>Þˆ“Ö“ÊL>˜`݈`Í…Ê
>••œV>Íi`ÊvœÀÊ!-07*-°
Zero or positive integer