Specifications

SmartSwitch 6500 Reference Manual 2-57
Console Commands
CpuSwitchover
Use CpuSwitchover to switch roles of the redundant (slave) and master TSM/CPU modules (the slave module becomes
the master module and vice versa). The
execute cpuswitchover command is available only if a slave module is
present.
2p›F "vÍiÀÊÍ…iÊÃ݈ÍV…œÜiÀ]ÊÍ…iʘiÝÊ“>ÃÍiÀÊ“œ`Ö•iÊ“ÖÃÍÊLiÊÀiLœœÍi`°
Operators
execute
Parameters
This attribute has no output parameters.
Descriptions
Examples
switch_prompt # execute cpuswitchover
BackupConfig(N) :
Backup the config and restore it on the redundant CPU when it boots up.
Input Parameter Description Value/Field Size Default
[BackupConfig] Sets/unsets a flag to backup configuration. Y (Yes), N (No) N
Operator Parameters/Permissions Description
execute
cpuswitchover
[BackupConfig] <backupconfig>
Administrator
Switches the slave TSM/CPU module to the master
TSM/CPU module and vice versa. The current
master configuration is backed up before the
switchover is made. After the switchover, the master
configuration is restored to the new master (the
module that was the slave before the switchover).