Specifications

2-72 SmartSwitch 6500 Reference Manual
Console Commands
IlmiConfig
Use IlmiConfig to manage ILMI timers specified in ILMI 4.0 and to enable or disable ILMI functions.
2p›F You can hot-swap TSMs. Hot-swapping is replacing a module when the chassis is
powered up. If you replace a TSM with another TSM of the same type (same I/O
ports), existing configuration of port parameters is not affected. This includes
parameters set using any of the following attributes: ATMRoute,
CACServiceClassBw, IlmiConfig, NetPrefix, Port, PortConfig, PVC, PVP,
ServiceRegistry, SigTimer, SigStatistics, SSCOPConfig, and SSCOPStatistics. If
you replace a TSM with another TSM of a different type, existing configuration
of port parameters is deleted. The deletion occurs when the new module is plugged
into the chassis backplane.
Operators
modify, show
Parameters
Input Parameter Description Value/Field Size Default
[PortNumber] Port number on the switch. 1A1 to 8B4 (for physical ports),
1A1.n to 8B4.n (for virtual ports),
or All
All
[IlmiAddressRegistration] Controls ILMI address registration. Enable, Disable Enable
[IlmiConnectivity] Controls ILMI connectivity. Enable, Disable Enable
[Timer-S] Timer S in seconds for establishing
ILMI connectivity.
1-65535 1
[Timer-T] Timer T in seconds for checking ILMI
connectivity.
0-65535 5
[Factor-K] Number of K consecutive polls for
which no ILMI response is received
before ILMI connectivity is declared
lost.
0-65535 4