Setup guide

LEDs
6C110 Overview and Setup Guide 2-5
2.4 LEDs
The following subsections describe the functions and definitions of the
LANVIEW LEDs for the power supply module and the fan tray unit for
the 6C110.
2.4.1 Power Supply LEDs
There are two LEDs on the power supply. Table 2-1 describes the
different states of the power supply LEDs and their definitions. Refer to
Figure 2-1 for the location of power supply LEDs.
NOTE
All four power supplies available for the 6C110 chassis have
the same LEDs.
Table 2-1 Power Supply LED States and Their Definitions
LED Name Color Status
PWR (Power) Green All outputs and inputs of the power supply
are within regulation.
Red Any output or input of the specific power
supply is out of regulation.
REDUNDANCY Green Redundancy is available.
Amber Redundancy is possible, but not available
(two power supplies are installed).
Off Redundancy not possible. (One power
supply installed.)