Specifications

Chapter 1: Features Overview
18 SSR 8000/8600 Getting Started Guide
DC Power Supply
The SSR DC power supply delivers 3.3, 5, and 12 volts DC to the SSR’s Control Module(s),
fan modules, and other components. A single DC power supply provides enough current
to operate a fully-configured chassis.
Figure 6 shows the front view of an SSR 8000 DC power supply.
Figure 6. Front View of an SSR 8000 DC Power Supply
The SSR 8000 DC power supply has a three-terminal wiring block on the front panel,
consisting of a positive(+) terminal, negative(-) terminal and a safety ground. The DC
supply is designed to be powered by a 48 Volt DC source. 12 to 14 gauge wire should be
used to connect the 48 Volt source to the SSR 8600 DC power supply. 12 to 14 gauge wire
should also be used for the safety ground.
Figure 7 shows the front view of an SSR 8600 DC Power Supply.
Figure 7. Front View of an SSR 8600 DC Power Supply
SSR-PS-8-DC
PWR
SN
!
To be installed in a restricted
access area in accordance
with the NEC or authority
having jurisdiction.
See manual for installation
instructions.
48/60V
14A MAX
PWR
SSR-PS-16-DC
SN
48/60V
27A MAX
!
To be installed in a restricted
access area in accordance
with the NEC or authority
having jurisdiction.
See manual for installation
instructions.