Specifications

Chapter 1: Features Overview
20 SSR 8000/8600 Getting Started Guide
LEDs
The SSR 8600 Switching Fabric module uses the following LEDs.
Line Cards
The following table lists the line cards available for the SSR. The line cards are equipped
with 4 MB, 16 MB, or 32MB of RAM.
LED Description
Offline When lit, this amber LED indicates that the module is offline
(powered off) and is ready for hot swap.
The Offline LED also is lit briefly during a reboot or reset of the
SSR and goes out as soon as the Control Module discovers and
properly initializes the switching fabric module.
Online When lit, this green LED indicates that the module is online
and is ready to receive, process, and send packets if configured
to do so.
Active When lit, this LED indicates that the switching fabric module
is actively receiving, processing, and sending packets.
SSR Part Number All pre
3.0 SSR
Firmware
Release
WFQ 3.0 SSR Firmware
NAT, LSNAT, QoS,
Rate Limiting, TOS
Rewrite, Per
Protocol VLANs,
Established Bit
ACL
SSR 3.1 Firmware
L4 Bridging, Mult
IPX Encap
Routing
Ta b l e o n
line card,
WRED,
Per Port
Rate
Limiting
Jumbo
Frame
Non AA Cards
SSR-HTX12-08 X X
SSR-HTX22-08 X X
SSR-HFX11-08 X X
SSR-HFX21-08 X X
SSR-HFX29-08 X X