Specifications

SSR 8000/8600 Getting Started Guide 31
Chapter 1: Features Overview
1000Base-LX Line Card
1000Base-LX (T-Series) Line Card
The 1000Base-LX and 1000Base-LX (T-Series) line cards provide the same features as the
1000Base-SX line card, but supports singlemode fiber (SMF) as well as MMF. Figure 15
shows the front panel of the 1000Base-LX line card.
Figure 15. Front panel of 1000Base-LX line card
Per-port Rx • Green – indicates when the port’s transceiver receives
packets.
• Orange – indicates when the port’s transceiver receives
flow-control packets.
Per-port Tx • Green – indicates when the port’s transceiver transmits
packets.
• Orange – indicates when the port’s transceiver transmits
flow-control packets.
Per-port AN • Green – indicates that the line card has auto negotiated the
operating mode of the link between full-duplex and half-
duplex.
• Orange (intermittent) – indicates that auto negotiation is in
process.
• Orange (solid) – indicates a problem with auto negotiation
configuration.
• Red – indicates an auto negotiation failure. This fault may
occur if the link partner does not support full duplex.
• Off – indicates that auto negotiation has been disabled or
the link is down.
LED Description
Hot
Swap
21
Online
Offline
Rx
Tx Link
AN
Rx
Tx Link
AN
Gigabit port Gigabit port
1000BASE-LXSSR-GLX19-02