Specifications

Figure 16 shows the front panel of the 1000Base-LX (T-Series) line card.
Figure 16. Front panel of 1000Base-LX (T-Series) line card
Cabling and Connector Specifications
The following table lists the media specifications for the 1000Base-LX and 1000Base-LX (T-
Series) line cards.
Port type Specification
1000Base-LX • 802.3z standard (also uses 802.3x for flow control)
• SC-style Media Interface Connector (MIC); either connection pin
in the MIC can be used for transmit or receive; see “1000Base-LX
Line Card” on page 75 for attaching cables
• 62.5 micron or 50 micron multimode fiber-optic cable
• 9.5 micron singlemode fiber-optic cable
• Maximum 550 meters (1804 feet)
1
segment length for 62.5 micron
multimode fiber-optic cable
• Maximum 550 meters (1804 feet)
1
segment length for 50 micron
multimode fiber-optic cable
• Maximum 5 kilometers (229,659 feet) segment length for 10
micron singlemode fiber-optic cable
1. Mode Conditioning Patch cord required.
21
Link
Offline
Online
Tx
Rx
1000BASE-LXSRR-GLX39-02
Hot
Swap
LinkTx
RxAN AN
Gigabit Port
Gigabit Port