Specifications

SSR 8000/8600 Getting Started Guide 81
Chapter 3
Software Installation
and Setup
This chapter provides the following SmartSwitch Router (SSR) software installation and
basic setup procedures:
• Installing the PCMCIA flash card (if you are upgrading from the software version on
the SSR’s boot flash)
• Powering on the SSR and booting the software
• Starting the Command Line Interface (CLI)
• Using the CLI to add an IP interface, subnet mask, and default gateway for CoreWatch
access
• Setting up passwords
• Setting up an SNMP community string and trap target
• Setting the DNS server’s IP address(es) and domain name
• Setting the SYSLOG server and message level
• Upgrading system image software
• Upgrading the boot PROM software
• Activating and saving configuration changes