Specifications

ST1kSdmPortApp SDM Port Configuration View
SPECTRUM Enterprise Manager 134 of 194 Ascom TimePlex ST-1000
• s is for subrate speeds.
• b is for bundle speeds (n x 64K).
• sf is for stuffed speeds (n x 56K).
• bsf is for speeds that can be bundled (b8bit)
or stuffed (b7bit) depending on the value of
Bit Mode.
• sf56k is switched 56k if Device Type is
2 .
• The default value is
b64k.
Interface
A read-write field with a possible value of
dte1
(the default value),
dte2 , dte3 , dce1 , dce2 , or
dce3 .
TxClockSource
A read-write field with a possible value of
receive , send , or system (the default value).
Bit Mode
A read-write field with a possible value of b7bit or
b8bit (the default value).
OOSOper
A read-write field with a possible value of
doNothing (the default value), forceFNS , mark ,
markFF , space , or spaceFF .
PortGen
A read-write field with a possible value of dsrDtr
or
trans (the default value).
Polarity
A read-write field with a possible value of
inverted or normal (the default value).
Port Type
A read-write field with a possible value of null
(the default value),
io , bandContent , inl , or
fsm16Connect .
INL Number
A read-only field with a value ranging from 0 to
31 , with 0 being the default value. This field is
applicable only if Port Type is set to
inl .
Device Type
A read-write field that shows the type of device
connected to the port. The default value is
3 . The
possible values are as follows:
• Values
1 through 10 and 255 are reserved by
ST-50, of which
1 is for voice, 2 is for switch
56,
3 is for clear channel, and 255 is for INL.
• Values
11 through 254 can be defined by you
for other device types.
For TDM channels connected between I/O ports,
the channel will not connect if the device types do
not match. For I/O to server port connections, the
device types will not be compared.
This field is not used by the ST-1000 node if Port
Type is
null or inl . If Port Type is inl but this
field is not
255 , the INL will not be failed. Also, if