Specifications

ST1kSdmPortApp SDM Port Configuration View
SPECTRUM Enterprise Manager 135 of 194 Ascom TimePlex ST-1000
Port Type is not inl but this field is 255 , the
channel defined on this port will still be able to
connect.
PartitionID
A read-write value giving the partition number
from
1 through 1023 .
Functions
A read-write field. The default value is 00 .
• The four least significant bits represent
whether the function mapped to that bit
should be forced or not.
- bit 1 (lsb) means DSR if DCE, DTR if DTE
- bit 2 means DCD if DCE, RTS if DTE
- bit 3 is reserved
- bit 4 means CTS if DCE, reserved if DTE
• The four most significant bits represent what
the function mapped to that bit should be
forced to when that function is suppose to be
forced.
- bit 5 means DSR if DCE, DTR if DTE
- bit 6 means DCD if DCE, RTS if DTE
- bit 7 is reserved
- bit 8 means CTS if DCE, reserved if DTE
ContentionSet
A read-write field with a value of
f1nf1 , f2nf2 ,
f4nf4 , nf4f4 , or disable (the default value).
LoopbackSupport
A read-write field that indicates whether the SDM
port should support the signals for LL, RL, and
TM. The possible values are
none (the default
value),
ll , rl , tm , llRl , llTm , rlTm , or llRlTm . If
a signal is supported, that loopback signal will be
recognized by the SDM. Otherwise, the signal will
be ignored.
SatelliteBuffer
A read-write field having the value
enable or
disable (the default value).
FailToggleRequest
A read-write field having the value noToggle or
toggleIfPortFail (the default value).
KGPolarity
A read-write field specifying the polarity of the
KG-resync signal and having the value
kgNegative (the default value) or kgPositive .
.KGSignalType
A read-write field specifying the type of KG-resync
signal and having the value
kgPulse (the default
value) or
kgLevel .
KGMode
A read-write field specifying the type of KG-
resync signal and having the value
kgDisable
(the default value) or kgEnable .