Specifications

ST1kDsmApp DSM Module Specific Status
SPECTRUM Enterprise Manager 163 of 194 Ascom TimePlex ST-1000
- local channel busy (132)
- circuit inactive (133)
- compatibility mismatch (134)
- inbound translation failed (135)
- outbound translation failed (136)
- remote channel busy (137)
- remote channel not responding (138)
- outbound time-out (139)
- inbound time-out (140)
- idle (141)
- pass-through failed (142)
- maximum number of hops exceeded (143)
• 44: Number of Call Attempts Between DSMs
• 45-48: Transmission Rate if the channel type
is TDM or CIR if the channel type is packet
• 49-52: Source Time
• 53-54: Source Call Identifier
• 55: Billing Stream Identifier
• 56: Channel Type (with values of TDM or
packet)
• 57-58: Customer Identifier
• 59: Compression Type with values that are
the same as the scVoicePrfNetCompressMode
attribute
• 60: Route Quality Indicator with values as
specified and overridden
• 61-64: Compression Rate
• 65-68: EIR if the channel type is packet or
Unused (zero) if the channel type is TDM
• 69-72: Bc if the channel type is packet or
Unused (zero) if channel type is TDM
Level 2 CDRs (Data Link Layer)
• 9-12: Setup Final Time
• 13-16: Connect Request Time
• 17-20: Connect Response Time
• 21-22: Source Node ID
• 23: Source Nest ID
• 24: Source Slot ID
• 25-26: Destination Node ID
• 27: Destination Nest ID
• 28: Destination Slot ID
• 29: Calling Number Size (number of bytes, not
string length). This number is referred to
below as x.
• 30 (29+x): Calling Number
• (30+x): Called Number Size (number of bytes,
not string length). This number is referred to
below as y.
• (31+x)-(30+x+y): Called Number
• (31+x+y): Routing Digits
• (32+x+y): Unused
• (33+x+y): Source TEI
• (34+x+y): Destination TEI