Specifications

ST1kDsmApp DSM Module Specific Status
SPECTRUM Enterprise Manager 166 of 194 Ascom TimePlex ST-1000
CallsPerSecFactor
The conversion factor between calls per second (in
units of 0.01 calls per second) and processing
units. The equation is: processing units = this
value X calls per second.
BypassFactor
The conversion factor between bypass bandwidth
(in PPS) and processing units. The equation is:
processing units = this value X bypass
bandwidth.
TotalProcessUnits
A rating for the total number of D-channel calls
per second and bypass bandwidth allowed on this
DSM. The two quantities are converted to the
same units using the values of the DSM Module
CallsPerSecFactor and BypassFactor fields.
ProcessUnitsAvail
A rating of the number of D-channel calls per
second and bypass bandwidth that is unused on
this DSM. To determine the amount that is
currently allocated, subtract this value from the
value of the DSM Module TotalProcessUnits
field.
This button on the DSM Module Status
Administration view provides access to the
following fields.
Addr
The address of DSM module.
ExchCodeLen
The length of the ExchCode attribute.
ExchCode
The exchange code.
Partition
The route partition ID.
RemoteNode
The node containing the DSM to which this
routing entry refers. For the local routing table
entries, this field has a value of
0 .
RemoteSlot
The module address in the node defined in
RemoteNode that contains the DSM to which
this routing entry refers. For the local routing
table entries, this field has value of
0.0 .
Module Routing Table Status