Installation guide

Chapter 2: Network Requirements
2-2 SSR-600 Installation Guide
2.2 100BASE-TX NETWORK
The two fixed front panel ports of the SSR-600 provide an RJ45
connection that supports Category 5 UTP cabling. The device at the other
end of the twisted pair segment must meet IEEE 802.3u 100BASE-TX
Fast Ethernet network requirements for the devices to operate at
100 Mbps. Refer to the Cabletron Systems Cabling Guide for details.
2.3 WAN NETWORK REQUIREMENTS
Each SWPIM has to meet its own cabling and network requirements to be
properly connected to the WAN. Please refer to the appropriate SWPIM
user’s guide for requirements.
NOTE
The fixed ports of the SSR-600 support Category 5 UTP
cabling with an impedance between 85 and 111 ohms for 10
and 100 Mbps operation.
The SSR-600 is capable of operating at either 10 or 100 Mbps.
The SSR-600 automatically senses the speed of the other
device and adjusts its speed accordingly.