Installation guide

Chapter 7 Managing an OS/2 Workstation

5. When you have completed your review (and your optional changes),

exit the Workstation Configuration dialog box.

• To exit this dialog box and discard any changes you made, choose

the Cancel button. The Setup screen returns. You are finished, and

steps 6 and 7 do not apply.

• To save any changes you made, choose the OK button. Depending

on this computer’s configuration and whether you made changes,

the TCP/IP Settings dialog box (step 6), the Configuration

Complete dialog box (step 7), or the Setup screen appears.

6. If the TCP/IP protocol is included in one of the configurations, and if

you chose the OK button in the Workstation Configuration dialog

box, the TCP/IP Settings dialog box appears:

Review or edit the TCP/IP Settings dialog box as necessary, and then

choose the OK button.

If you made no changes, the Setup screen returns and you are

finished. If you changed the TCP/IP settings, the Configuration

Complete dialog box appears: