Installation guide

94 Installation Guide for Clients
Managing Services Parameters
Services parameters are set to their default values during installation.
They can be modified only after installation, using the Configuration
menu’s Services command.
For an OS/2 workstation, you can change only the Messenger service
parameters.
Û To review or change the services parameters
1. From the Configuration menu, choose Services.
The Services Parameters dialog box appears:
2. Select a service by clicking it, or by pressing the UP or DOWN ARROW
key until the service is highlighted.
3. Choose the Zoom button. The parameters dialog box for that service
appears.
4. Review and, if necessary, change the parameter settings for the
service. For information about the acceptable range of values for each
parameter, press F1 or choose the Help button.
5. After the parameters are set, choose the OK button to save the
parameter settings, or choose the Cancel button to cancel changes to
the parameter settings. The Services Parameters dialog box reappears.