Installation guide

98 Installation Guide for Clients
Û To attach LAN Manager to an OS/2 workstation
1. From the LAN Manager menu, choose Attach.
A dialog box appears, asking you to confirm the attach request.
2. Choose the Yes button.
The Setup program attaches LAN Manager.
3. Wait for the attach process to proceed. When instructed by the Attach
Ready to Complete dialog box, shut down MS OS/2 from
Presentation Manager, and then reboot the computer.
4. Wait for the attach process to continue. When instructed by another
dialog box, shut down OS/2 from Presentation Manager, and then
reboot the computer.
Removing LAN Manager
The LAN Manager menu’s Remove command removes LAN Manager
software from the computer.
Remove LAN Manager when you no longer want this computer to be a
LAN Manager OS/2 workstation, or when you are installing new
LAN Manager software and you prefer to create a new LAN Manager
configuration.
Before removing LAN Manager, you must stop the Workstation
service.
It is a good idea to save files for reference before you remove
LAN Manager. Copy them to another directory or to a removable disk
before removing the installation. For example, you might want to save:
• CONFIG.SYS, STARTUP.CMD, and all *.INI files in the
LAN Manager directory
• Third-party network device drivers (not originally provided with
LAN Manager) from the LANMAN\DRIVERS directory and
subdirectories
• Error logs and message logs from the LANMAN\LOGS directory