Installation guide

Chapter 9 Network Device Driver Options 151
3Com EtherLink 16
Required entry:
• drivername = elnk16$ or elnk16n$
The following table summarizes the possible entries and values in the
[elnk16] section of the LAN Manager PROTOCOL.INI file:
Entry Units Range Default
drivername — — elnk16$ or
elnk16n$
iobase hex. 200–3F0 300
netaddress hex. 12 hex. digits —
Entries in the [elnk16] section of the LAN Manager PROTOCOL.INI
file have the following meanings:
drivername
Identifies the device driver name. The drivername is elnk16$ for the
first EtherLink 16 adapter, elnk162$ for the second, and so on.
iobase
Identifies the I/O base address.
netaddress
Overrides the network address of the network adapter. This entry
should only be used if, for some reason, there are duplicate addresses
on the network. The value of this entry is a hexadecimal string of 12
digits enclosed in quotation marks, such as "02608C010001".