Installation guide

176 Installation Guide for Clients
ram
Indicates the base-segment address of the dual-port memory for the
adapter. Valid entries are: A000, A400, A800, AC00, C000, C400,
C800, CC00, D000, D400, D800, DC00. If the machine has 512K of
base RAM, the following values are also available: 8000, 8400, 8800,
8C00, 9000, 9400, 9800, 9C00. The ram parameter is ignored on a
Micro Channel Architecture computer.
slot
Indicates the Micro Channel slot where the adapter is located. This
value is not valid for ISA. Use the slot parameter only when more
than one 10NET adapter is present.