Installation guide

180 Installation Guide for Clients
Dowty
Required entry for OS/2:
• drivername = pc04$
Required entry for MS-DOS:
• drivername = pcndis$
These drivers are for the following network adapters:
• Dowty PC0114
• Dowty PS0114
The following table summarizes the possible entries and values in the
[dowty] section of the LAN Manager PROTOCOL.INI file:
Entry Units Range Default
drivername — — pc04$ (OS/2)
pcndis$
(MS-DOS)
interrupt integer 2–15 3
loopback — off, on off
maxqcb integer 0–16 16
memaddress hex. 0–FFFFF D0000
notxownpkt — off, on on
protocol — raw, tp4 raw
rxfilter (OS/2
only)
— off, on on
rxsap (OS/2
only)
— off, on on
rxtype (OS/2
only)
hex. — —
timeout.boot
(OS/2 only)
hex. — F4 F0 E4 E0 AA
48
Entries in the [dowty] section of the LAN Manager PROTOCOL.INI file
have the following meanings:
drivername
Identifies the driver name of the network device driver: pc04$ for
OS/2, or pcndis$ for MS-DOS.
interrupt
Indicates the interrupt level of the network adapter. The interrupt
parameter must match the adapter’s interrupt jumper settings.