Installation guide

202 Installation Guide for Clients
Intel EtherExpress 16
Required entry:
• drivername = exp16$
This driver is for the following network adapters:
• Intel EtherExpress 16
• Intel EtherExpress 16TP
The following table summarizes the possible entries and values in the
[exp16] section of the LAN Manager PROTOCOL.INI file:
Entry Units Range Default
drivername — — exp16$
ioaddress hex. 200–370 300
Entries in the [exp16] section of the LAN Manager PROTOCOL.INI file
have the following meanings:
drivername
Identifies the driver name.
ioaddress
Indicates the current I/O address jumper configuration of the network
adapter. This value must match the adapter’s switch settings. When
remote booting, this value must be 300.