Installation guide

Chapter 9 Network Device Driver Options 209
Madge Networks Smart 16/4
Required entry:
• drivername = smartnd$ or smartndn$
This driver is for the following network adapters:
• Madge Networks Smart 16/4 AT RingNode
• Madge Networks Smart 16/4 EISA RingNode
• Madge Networks Smart 16/4 MC RingNode
• Madge Networks Smart 16/4 XT RingNode
The following table summarizes the possible entries and values in the
[madge] section of the LAN Manager PROTOCOL.INI file:
Entry Units Range Default
autoopen — no, yes yes
copyalldata — no, yes yes
dmachannel integer 1–8 —
drivername — — smartnd$ or smartndn$
ioaddress hex. — See explanation
irqnumber integer 1–15 —
maxframesize integer 0–17814 4484 (OS/2) 1550
(MS-DOS)
maxtransmits integer 0–100 20 (OS/2) 4 (MS-DOS)
nodeaddress hex. 12 hex. digits —
os2v2compatible — no, yes —
openoptions hex. 0–FFFF 0
rxbuffersize integer 0–60000 See explanation
txbuffersize integer 0–60000 See explanation
watchdog — no, yes no