Installation guide

216 Installation Guide for Clients
func_address
Indicates the NetBIOS functional address type. A value of new
indicates that the address is compatible with LAN Manager; old
indicates that the address is compatible with the first version of NCR
StarLAN software. Specify old only for an existing network using the
first version of NCR StarLAN software.
interrupt
Indicates the interrupt level of the network adapter.
lan_id_rom
Specifies the value of the LAN ID ROM where the burned-in address
is stored. Enter the address in hexadecimal digits.
node_address
Overrides the Permanent-Station Address to specify the network-
node address. The value should consist of 12 ASCII hexadecimal
digits. The default value is the burned-in address read from the
adapter’s ROM.
num_genreq
Specifies the number of general requests the driver should queue.
num_rcvs
Specifies the number of received frames the driver should queue.
Received frames are queued when the protocol driver has turned off
indications, prohibiting the media-access control driver from
immediately calling ReceiveChain.
num_xmt_bufs
Specifies the number of transmit buffers for the driver. This entry
defines the number of TransmitChain requests the media-access
control driver can accept without giving an OUT_OF_RESOURCE
response.
port_address
Specifies the value of the port address used to access the StarLAN
hardware. Enter the value in hexadecimal digits.
rcv_buf_size
Specifies the size of the media-access control driver’s receive buffer.