Installation guide

240 Installation Guide for Clients
PureData Ethernet Adapters
Required entry:
• drivername = pdieth$ or pdiethn$
This driver is for the following network adapters:
• PureData PDI8023-8
• PureData PDI8023-16
• PureData PDuC8023
The following table summarizes the possible entries and values in the
[pdieth] section of the LAN Manager PROTOCOL.INI file:
Entry Units Range Default
drivername — — pdieth$ or
pdiethn$
ioaddress hex. 200–3E0 280
Entries in the [pdieth] section of the LAN Manager PROTOCOL.INI file
have the following meanings:
drivername
Identifies the device driver name. The driver name consists of the base
portion of the filename, plus a digit if more than one adapter is
installed. The drivername is pdieth$ for the first adapter, pdieth2$
for the second, and so on.
ioaddress
Indicates the current I/O address for the network adapter. If this entry
does not match the adapter’s address jumper settings, the driver
reports an error.